YGE Optocoupler

Optocoupler - Module

For converting BEC controllers to electrical isolation between receiver and motor circuit. Highly recommended for currents greater than 40A, and from 4 LiPo or 12 cell NiCd / NiMh. With the use of the module, a receiver battery switch harness is required. The receiving system is no longer from the controller, but only supplied by the receiver battery.

Features:

     * Higher Security
     * best noise suppression
     * no risk for deep discharge battery flight
     * almost no load on the BEC, thus less heat in the controller
     * Strengthening of the receiver signal