This is the white and orange version of one of the most revolutionary helicopters of today. The Raw 420 has an incredibly large, direct drive motor offering superb and quiet. Also featuring ultra smooth performance, for 3D pilots and incredible efficiency for sport flyers and beginners alike!
This SAB Goblin is designed to run on a 6s pack ranging from 2200 to 2700 mAh and comes with motor and blades. You simply need to get servos (3x micro cyclic & 1x mini tail), an ESC and a flight controller / Flybarless unit! We recommend either the HobbyWing 60 or 80 amp controller. If you are planning on doing Normal / Mild 3D or sport flying(loops, rolls, tic-tocs, funnels, etc..), the HobbyWing 60 is the best choice. For harder professional 3D flying, then the HobbyWing 80 amp ESC is preferred.
NOTE: The kit ships with one battery tray, make sure to get more if you plan on having more than one battery ready to go. Trays and other accessories can be found HERE.
Raw 420 Specifications:
Airframe weight: 1000 grams (with motor and blades)
Main rotor diameter 935mm (with 420mm blades)
Main blade length 380 to 420mm
Tail rotor diameter 190mm (with 70mm tail blades)
Tail blade length 60 to 70mm
Micro size cyclic servos (23mm)
Mini size tail servo (35mm)
Maximum battery size 40x54x135mm
Recommended battery 6s 2200/2700 mAh
Recommended battery weight 350-420 grams
Recommended ESC Hobbywing 60 amp ( 70-80A is only required for hard 3D flight along with outdoor temperatures above 30°C or 86 Fahrenheit)
Tail rotor ratio 4:1
Strong Extra Thick 8mm main shaft
Strong Extra Thick 5mm tail shaft