OMP M2 EVO - 3D helicopter (Bind-n-Fly)

NOTE: This is a bind-n-fly, fully assembled helicopter. However, we suggest that you have some experience with building, flying, and Setting Up a RC helicopter before buying this model, as it is a fully 3D capable model, and since after a crash you may have to disassemble, and replace any broken parts.

The OMP M2 EVO BNF Electric Helicopter takes the popular M2 platform to the next level. Featuring an updated flybarless head design, longer main blades, optimized brushless motors and adjustable tail boom length just to name a few this helicopter is truly an evolution of the M2. Built with a dual brushless motor direct drive main and tail system, M2 offers amazing simplicity and unheard of performance thanks to these high-powered brushless motor systems. Paired with a fully adjustable flight controller in combination with an adjustable length tail boom and longer main blades not only can the M2 be precise but can also be highly aerobatic depending on your preference.

Using a direct drive setup this helicopter benefits from an extremely efficient drivetrain along with a larger 750mah 60C LiPo battery you can expect generous flight times of up to 10 minutes! The flight controller is an all-in-one unit that houses not only the gyro system, but dual ESCs for the motors, and supports both S.Bus and DSM2/DSMX receiver connections.

Features:

• Updated FBL Head (compared to DFC in other versions)
• Longer main blades, enlarged to 190mm for better performance
• Redesigned tail motor & blades result in quieter flight & smoother control
• Adjustable tail boom offers variable length for different experiences
• Larger 3S (11.1V) 60C 750mAh LiPo battery
• More powerful main motor
• Four highly visible color schemes to choose from

NOTE: Spektrum Satellite receiver not included(for Spektrum binding process see the short video at bottom of page).

• To find manuals, and how to set up with Spektrum or Futaba CLICK HERE
• How to change settings in the FBL unit CLICK HERE

Specifications

• Main Motor: SunnySky V4-II
• Tail Motor: SunnySky R1-II
• Servos: 10g 5V 0.08set / 60-1.65kg.cm
• Main Rotor Diameter: 434mm
• Tail Rotor Diameter: 89mm
• Flying Weight: Approx. 335g
• Dimensions: 428mm*72mm*138mm
• Battery: 3S 750 mAh 60C
• Flight Time: Maximum flight time 10 mins – 4 mins for extreme 3D maneuvers

IN THE BOX

• 1x Helicopter
• 1x LiPo Battery
• 1x swash leveling tool
• 1x spare Feathering shaft
• 1x spare Main shaft
• 3x servo arms
• 3x zip ties
• 1x Instruction leaflet
• 1x EPP box

SPEKTRUM BINDING PROCESS: