GAUI X5 V2 (Belt version) Flybarless Helicopter Kit

• INCLUDED: Gaui 82mm Tail Blades are included
• INCLUDED: Steel Pinion Gear Pack(14T - for 6mm shaft) x1
• Note: 500mm ~ 550mm Main blades NOT included.

Tareq having fun with his Gaui X5!

Required for operation (not included)

*Transmitter(6-channel or more, helicopter system)
*Receiver and or Sat, and FBL Unit

*LiPo Battery: 6S 3700mah to 5000mah 22.2v / Max size:61x49x150mm / 6S  4000 to 4200mah is typical for 3D with 520mm blades
*ESC: 100A or lager ESC recommended
*Motor: 6S - 850-1100kV / 12S - 450-550 (pinions available: 12t, 13t, 15t, 16t, 17t, 18t, for 5mm shaft)/ /(14t & 15t for 6mm shaft)

*Motor Size example: Scorpion 4020, 4025, 4035. Xnova 4020, 4025, 4035. (4020 (or) 4025 suggested, 4035 for very hard 3D)
*Flybarless System
*Standard/Full size CCPM cyclic Servo x 3pcs
*Standard/Full size Tail Servo x 1pc

*Main Blades 500mm ~ 550mm

Tools and Equipment for Assembly (not included)

*1.5 mm Hexagon Screwdriver
*2 mm Hexagon Screwdriver
*2.5 mm Hexagon Screwdriver

*3.0 mm Hexagon ScrewDriver
* Philips Screw Driver
* Lubricant / one-way bearing grease
* Needle-nosed pliers
* General thread locks