Specifications:

●Overall Length (with Canopy): 709mm
●Main rotor diameter: 812mm (Main Blades 360mm) 862mm (Main Blades 385mm)
●Recommended Main blade length: 350~362mm
●Overall Height: 208mm
●Overall Width: 87.8mm
●Tail Blade Length: 60~68 mm
●Tail Rotation Diameter: 172mm (62mm)
●ESC: Minimum 50A ESC
●LiPo battery: 1250~ 1800 mAh
●BL Motor : 2520 ~ 3226 (Suggested 1250~1580KV)(1360KV is suggested for most pilots)
●Total weight: 575g ±3% (kit with canopy,w/o electronics, blades and batteries.)

• Blades in photo below are not included

Tools and Equipment for Assembly - (*not included)

*Required For Operation

*1.5 mm Hexagon Screw Driver
*2 mm Hexagon Screw Driver
*2.5 mm Hexagon Screw Driver
*Philips Screw Driver
*Lubricant / one-way bearing grease
*Spring calipers, Needle-nosed pliers
*General thread lock
*This kit does not include a motor, or any other electronics, you will need to purchase them seperatly.
*Available pinions for X3 are as follows (Pinion 11T~13T)

Also Required For Operation

*Transmitter(6-channel or more, helicopter system)
*Receiver(6-channel or more)
*CCPM Micro Cyclic Servos x3 / Micro or Mini Tail Servo x1 (Mini size tail servo suggested)
*LiPo Battery :3S & 6S (6S Suggested)
*ESC: 50A or higher ESC recommended
*3 Blades CF main blades (350-380mm)
*Flybarless System
*10~13T Pinion Gear
*Brushless Motor Suggestion : Scorpion 2520-1580 / Gaui GM-505 / Xnova 2618-1580 / Scorpion 3226-1400 / Scorpion 3226-1600